All the Solutions for Energy Management
From reactive penalty to transformer monitoring, from budget forecasting to billing — discover every energy management solution unified in Argus EMS.
Reactive Penalty Prevention
Cumulative monitoring and alerts before the EPDK inductive 20% / capacitive 15% threshold is exceeded.
Explore →Transformer Monitoring
Load ratio, temperature and harmonic monitoring; detect faults before they happen.
Explore →UPS & Generator Monitoring
Battery, fuel level, runtime and ATS transfer events monitored 24/7.
Explore →Budget Forecasting
Automatic monthly energy budget from historical consumption and weather correlation.
Explore →Power Quality Monitoring
Track THD, phase imbalance and voltage quality at 15-minute granularity.
Explore →Alarm Engine
Rule-based smart alarms for energy, transformer, generator, UPS and water.
Explore →Main Meter Monitoring
Transformer as main meter, time-of-use (day/peak/night) tariff analysis and submeter hierarchy.
Explore →Billing
Sub-tenant electricity/water billing, multi-period EPDK tariff calculation, automatic PDF generation.
Explore →Data Assurance
Field agent SQLite queue with ACK verification; no reading is lost even during an outage.
Explore →Energy Efficiency
Measure, analyse, reduce — quantify loss points from your facility's own data.
Explore →Pricing
Compare subscription, on-prem, and manual-tracking costs and get a tailored quote.
Explore →Compensation Monitoring
Capacitor step health, THD impact and pre-penalty alarms via RKR relay integration.
Explore →Chiller Optimisation
Brand-independent chiller monitoring, remote setpoint and rule-based night mode for savings.
Explore →Natural Gas Monitoring
Daily gas tracking from distributor measurements; correct cost via the K coefficient, HDD-based budgets.
Explore →Carbon Tracking
Automatic Scope 1-2 carbon footprint from electricity and gas; ISO 50001-ready reports.
Explore →EV Charging Monitoring
Charging station monitoring over OCPP: session and kWh tracking on one screen with facility load.
Explore →Water Leak Early Warning
Night base-flow monitoring; automatic alarms on continuous flow and suspected leaks.
Explore →Electricity Consumption Monitoring
kWh monitoring at main meter and sub-meter level; day/peak/night distribution and tariff-based cost.
Explore →Water Consumption Monitoring
Remote reading from M-Bus water meters; per-apartment and per-block breakdown, main-to-sub gap tracking.
Explore →One Platform, Every Energy Type
Each solution isn't a separate module — it's part of one integrated system running on the same database and the same dashboard. Electricity, water and gas on one screen; transformer, UPS and generator in one alarm engine.
Built for 300-400 Projects
The architecture is designed for performance independent of accumulated data volume — one project or 300 projects run at the same speed.
Field Agent Assurance
Every reading from Modbus TCP/RTU and M-Bus devices is kept until ACK-confirmed; no data is lost even during an internet outage.
Enterprise Security
Two-stage JWT authentication, role-based access by scope × write permission (platform / group / project) and a full audit log.
From Solution to Deployment
If you would rather start from your facility type, the sector pages explain which points are measured in each; for whole-building operation see building automation and energy management, and for choosing measurement hardware continue with energy analyser and supported devices. The infrastructure every solution runs on is described on the Argus EMS platform page.